User's Manual

15
2. From the Available network tab, double click on the SSID or Access the SSID and click on
Connect.
When you are successfully connected, a green
signal meter will appear in the status bar
.
When the HWDN3 fails to connect, a red bar signal
meter appear in the status
bar. .
Note: If you mouse over the red bar, it will indicate that
the Adapter is disconnected.
To see a list of available wireless networks,
select Available Network tab Select
Refresh. All detected service set identifiers
(SSID) will be listed under SSID column.
Encryption/Security/Authentication:
If the selected SSID is an open network or
has no encryption, “none” will be listed under
the Encryption column.)
If the selected SSID has encryption (WEP,
TKIP, WPA), please enter the password in the
network key field and confirm network key
fields. If you don‟t have the password, please
contact your network administrator.