User's Manual

Introduction
This product is an access point with a singal booster for IEEE 802.11g/b 2.4GHz
wireless network. You can use this access point to build up a wireless LAN with
better coverage area.
The Access Point supports WPA-PSK, WEP, ESSID and MAC address filter
functions to consolidate the wireless network security. With ESSID
authentication, WPA-PSK, 64/128-bit WEP encryption and MAC address
filtering you can prevent unauthorized wireless stations from accessing your
wireless network.
The Access Point’ s dipole antenna is detachable by connecting to a RP-SMA
connector. By removing the dipole antenna from the Access Point and simply
using a HPP cable that includes in the package to connect the Access Point to the
Signal Booster, it significantly extends the coverage area to improve the overall
network performance.
The Signal Booster offers 100/200/500mW selections. Users are free to select
desired output power by adjusting the “mode” switch on the side of the Signal
Booster unit. The output power is up to 25dBm when the 500mW output power is
selected.
With the versatile of features, this product is the best choice for you to integrate
your wireless and wired network seamlessly.