User's Manual

9
6.2 - Gateway Back Panel
RESET – The reset button can reboot (when pressed for 1 second) your HomeRemote
Gateway when an error occurs or your HomeRemote Gateway stops functioning
for some reason. A small pin or paper clip may be required to access the recessed
button. When held for over 10 seconds, the Gateway will reset itself to the
original default settings and all prior configurations will be lost.
POWER – The power jack is used for connecting your power adapter to.
NETWORK – The port is for connecting your HomeRemote Gateway to an available LAN port
on your home router. The Network port accepts standard RJ-45 Ethernet cabling.
ANTENNA – The antenna on the HomeRemote Gateway is a non-removable antenna used for
sending out wireless commands to your Z-Wave home control modules.