User's Manual

can view this screen full sized by selecting the ‘Large’ button on

the bottom right using your cell phone buttons.

Note: Video quality and speed will vary depending on your

cellular carrier broadband technology offering, cell phone model,

geographical location and cellular data plan. It is recommended

you use a 3G phone with broadband Internet access for the best

quality video on your cell phone.

Installation and setup of HomeRemote Video Cameras for your

Cell Link account is very simple. Simply run the Setup Wizard

included with your camera. This will configure the camera to

your current HomeRemote Gateway. Once this is completed,

the Cell Link application will automatically update itself with

your latest settings the next time you run the program from your

phone. Cell Link will automatically create a ‘Cameras’ tab to

view all cameras in your system. Additionally you will be able

to find your cameras by navigating the menus of each room.

13.7.2 - Other Devices (Thermostats, Window Shades etc…)

The Cell Link service is capable of controlling virtually any device

installed on your HomeRemote System. Navigation of each is the

same as turning on and off a light in a Room.

In the Thermostat menu, current status is shown. To change mode,

select Current Mode with the OK key, then choose the new mode

by highlighting and using the OK button. To adjust the set point,

select Current Set Point. Adjust the temperature by using the up and

down navigational keys, and set using the OK key. Select Fan to

adjust the fan setting to either Auto or On by using the up and

down navigational keys, and set using the OK key.

Window Shade operation is similar to turning lights on and off.

Use the up and down arrows to select a height that you wish the

window shade to be set to and click ‘Select’ when the desired

height is reached.