User's Manual

38
12.5.9 - Resetting the Gateway
In the Reset Gateway page you can reset your Gateway to default settings or reset only your Z-
Wave network settings to remove all modules within your network. It is recommended that you
do not use this feature unless you understand the effects of your changes. Resetting the Z-Wave
Home Network will remove all modules, module names and settings from your Gateway. You
will need to re-add these modules in from your remote control. The Reset HomeRemote
Gateway feature will reset your Z-Wave Network settings along with all other settings on your
Gateway. The HomeRemote Gateway will be reset to the original settings when you first
purchased the product. All information will have to be reconfigured in order for the Gateway to
work.
12.5.10 - TZO/DDNS Configurations
The TZO Dynamic Domain Name Server configuration page shows you your current DDNS and
custom domain name settings. The HomeRemote Gateway uses TZO’s award winning DDNS
service to constantly monitor your Internet IP address for changes so you do no have to worry
about it. You simply need to remember your custom domain name created during the Setup
Wizard process.