User's Manual

36
Login Setup
To change your password on your HomeRemote Gateway you will need to type in your new
password and then retype the same password. Click Change and you will be required to use your
new password to login.
12.5.7 - Firmware Upgrades
Every so often, Hawking Technologies will release a new firmware to add new features and
benefits to your HomeRemote Gateway. The firmware is a file that is downloaded and installed
to your Gateway that the Gateway uses to operate. The Firmware Updates page shows you your
current firmware version as well as a location to upgrade your existing firmware. To check for
new firmware, simply click the Check for New Firmware button, download the firmware file to
your computer’s hard drive, Select Browse on the interface and locate the downloaded file.
Click Upgrade Firmware to confirm the upgrade. Note: the upgrade may take several minutes.
DO NOT remove any plugs or adjust any settings during this time. Doing so may damage the
Gateway and cause to stop working.