User's Manual

34
12.5.5 - Adding Network Cameras
When adding a Network Camera to your HomeRemote System, the Setup Wizard that is
included with the HomeRemote Camera is used to setting up your Camera. In the event that the
Camera requires maintenance or you wish to manually setup a HomeRemote Video Camera you
can use the Network Camera Setup page to do so. When adding a camera, you will need to
assign it a name, a location (i.e. Living Room) from your list of assigned Rooms as well as a
web port number that is setup for the use of your camera through your router (typically 82 or 83
etc…). The Mobile View Extension is used for web based snapshots viewed from a cellular
phone web browser or standard web browser. From this page you are also able to adjust the
settings of previously installed cameras. You can change the Room location or name of the
camera as it appears on your HomeRemote web-based interface.