User's Manual

29
12.5 - Setup Page
The Setup Page used to adjust your Gateways internal settings. From here you are able to adjust
your local network settings, add or remove rooms, add new devices, change the clock time,
reconfigure your notification settings, save and load profiles, update your firmware, reset the
entire Gateway and change your DDNS settings and Web-address settings. It is highly
recommended that you do not change these settings unless understand the effects of your
changes.
12.5.1 - Clock Setup
The internal Clock of your HomeRemote
Gateway is set to automatically update itself
using the Internet. You have the choice to
manually set your time, however it is
recommended that you use the time servers
set in the Gateway.
If you see that your time is incorrect and
you are using the time servers in the
Gateway you may want to choose your
correct Time Zone to have it reflect your
current time.The Clock is used for your
Scheduled events and time stamping the
events that occur within your system.