User's Manual

9.2 - Hardware Setup

The Hardware setup page will guide you through the

correct setup of your HomeRemote Gateway to your

home router. Follow the diagram to correctly connect

your Gateway and then click Next.

If there is something wrong with your hardware setup,

the Setup Wizard will let you know and give you

instructions on how to correct your setup.

9.3 - Locate the Gateway

The Locate the Gateway page will scan your network

for your Gateway. If your hardware connections have

been setup correctly the Gateway should appear in the

table on the page. Highlight the Gateway and click

NEXT to continue.

9.4 - Network Setup

The Network Setup page will go over your current

network settings. The Setup Wizard will pull an IP

Address from your router’s DHCP server or your

computers IP address (in the case that you are using a

Static IP network) and assign itself an IP in the same

subnet. If the IP address does not automatically appear

you may click Query IP to have the wizard select

another IP Address.

Click Next to continue.