User's Manual

"Reset" will clear your current selections.

Delete Please select a special application by clicking

Selected (11): the „Select‟ box of the mapping, then click „Delete

Selected‟ button to remove the setting. If there‟s no

setting here, this button will be grayed out.

Delete All (12): Delete all settings existed in trigger port table.

Reset (13): Unselect all settings.

Note: Only one LAN client can use a particular special application at a time.

After you finish with all settings, please click „Apply‟ (14) button and the

following message will be displayed on your web browser:

Press „Go Back to save the settings made and go back to the web

management interface; press „Apply‟ to save the settings made and restart the

Outdoor Wireless-N Smart Repeater so the settings will take effect after it

reboots.