User's Manual

26
which will help you to complete all required settings you need to access the
Internet in a very short time. Please follow the following instructions to
complete the „Quick Setup‟:
a. The first step of the „Quick Setup‟ is to locate a position to place your
Outdoor Wireless-N Smart Repeater. The position should be a
location where the Repeater can pick up the signal that you wish to
repeat (i.e. the neighbor‟s wireless connection, local hot spot etc…).
b. After you have found this location you will need to position the antennas
optimally by upgrading the Internet Antenna if possible to a Hi-Gain
Antenna, however this is not necessary. If you do not have a Hi-Gain
Antenna you may proceed with the setup process.
c. Click Scan to locate all the networks within your area. Once you have
found the network you wish to repeat, highlight it and click Next. Each
wireless network will be listed with their respective signal strengths and
whether or not they are using security. For secure networks, you will
need to have the correct key to access the network. If you do not you
will not be able to repeat this network. It is recommended that the
signal strength of the network you are trying to repeat is above 50% to
ensure a solid connection to the Internet. Without a stable Internet