User's Manual

25
Input „ipconfig‟, then press „Enter‟ key. Please check the IP address followed
by „Default Gateway‟ (Please note that this value may be different.)
3. Connect the Outdoor Wireless-N Smart Repeater‟s management interface
by web browser
After your computer obtained an IP address from the Outdoor Wireless-N
Smart Repeater, please start your web browser, and input the IP address of
the Outdoor Wireless-N Smart Repeater in address bar. The following
message should be shown (or you may type in http://setup.hawkingtech.com
to access the quick setup menu):
Please input user name and password in the field respectively, default user
name is „admin‟, and default password is „1234‟, then press „OK‟ button, and
you can see the web management interface of this Outdoor Wireless-N Smart
Repeater.
2-3 Using ‘Quick Setup’
This Outdoor Wireless-N Smart Repeater provides a „Quick Setup‟ procedure,
NOTE: If the IP address of Gateway is not displayed, or the address followed
by ‘IP Address’ begins with ‘169’, please recheck network connection
between your computer and Smart Repeater, and / or go to the beginning of
this chapter, to recheck every step of network setup procedure.