System information

95
Public IP You can select ‘Dynamic IP’ or ‘Static IP’ here.
address (2): If you select ‘Dynamic IP’, you have to select an
Internet connection session from dropdown menu; if
you select ‘Static IP’, please input the IP address that
you want to map to a specific private IP address.
Client PC IP Please input the private IP address that the
address (3): Internet IP address will be mapped to.
Computer Name (4): Pull down the menu and all the computers connected to
the Outdoor Wireless-N Smart Repeater will be listed
here. You can easily to select the computer name
without checking the IP address of the computer.
Add (5): Click ‘Add’ button to add the public IP address and
associated private IP address to the DMZ table.
Reset (6): Click ‘Clear’ to remove the value you inputted in Public
IP address and Client PC IP address field.
Current All existing public IP address and private IP
DMZ table (7): address mapping will be displayed here.
Delete If you want to delete a specific DMZ entry, check
Selected (8): the ‘select’ box of the DMZ entry you want to delete,
then click ‘Delete Selected’ button. (You can select
more than one DMZ entries).
Delete All (9): If you want to delete all DMZ entries listed here, please
click ‘Delete All’ button.
Reset (10): You can also click ‘Reset’ button to unselect all DMZ
entries.
After you finish with all settings, please click ‘Apply’ (11) button and the
following message will be displayed on your web browser: