System information

"Reset" will clear your current selections.

Delete Please select a special application by clicking

Selected (11): the ‘Select’ box of the mapping, then click ‘Delete

Selected’ button to remove the setting. If there’s no

setting here, this button will be grayed out.

Delete All (12): Delete all settings existed in trigger port table.

Reset (13): Unselect all settings.

Note: Only one LAN client can use a particular special application at a time.

After you finish with all settings, please click ‘Apply’ (14) button and the

following message will be displayed on your web browser:

Press ‘Go Back to save the settings made and go back to the web

management interface; press ‘Apply’ to save the settings made and restart the

Outdoor Wireless-N Smart Repeater so the settings will take effect after it

reboots.