System information

77
Here are descriptions of every setup items:
Enable (1): Check this box to enable special applications and
uncheck this box to disable virtual server.
IP Address (2): Input the IP address of the computer which you want to
open the ports.
Computer Name (3): Pull down the menu and all the computers connected to
the Outdoor Wireless-N Smart Repeater will be listed
here. You can easily to select the computer name
without checking the IP address of the computer.
TCP Port to Open (4): This is the out going (Outbound) range of TCP port
numbers for this particular application.
UDP Port to Open (5): This is the out going (Outbound) range of UDP port
numbers for this particular application.
Comment (6): The description of this setting.
Pop. Applications This section lists the more popular applications that (7):
require multiple connections. Select an application
from the Popular Applications selection and click ‘Add’
to save the setting to ‘Current Trigger-Port Table.’
Add (8): Add the setting to the ‘Current Trigger-Port Table.’
Reset (9): Click ‘Reset’ will clear all above setting and you can set
up again.
Current Trigger-Port All the settings for the special applications will be
(10): listed here. If you want to remove some Special
Application settings from the " Current Trigger-Port
Table", select the Special Application settings you want
to remove in the table and then click "Delete Selected".
If you want remove all Special Appliacation settings
from the table, just click "Delete All" button. Click