System information

Add (7): Add the mapping to port forwarding table.

Reset (8): Remove all inputted values.

Port Forwarding All existing port forwarding mappings will

Table (9): be displayed here.

Delete Please select a port forwarding mapping by

Selected (10): clicking the ‘Select’ box of the mapping, then click

‘Delete Selected’ button to remove the mapping. If

there’s no existing mapping, this button will be grayed

out.

Delete All (11): Delete all mappings existed in virtual server table.

Reset (12): Unselect all mappings.

After you finish with all settings, please click ‘Apply’ (13) button and the

following message will be displayed on your web browser:

Press ‘Go Back to save the settings made and go back to the web

management interface; press ‘Apply’ to save the settings made and restart the

Outdoor Wireless-N Smart Repeater so the settings will take effect after it

reboots.

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.