System information

72
Here are descriptions of every setup items:
Enable Port Check this box to enable port mapping,
Forwarding (1): and uncheck this box to disable port mapping.
Private IP (2): Input the IP address of the computer on local network
which provides Internet service.
Computer Name (3): Pull down the menu and all the computers connected to
the Outdoor Wireless-N Smart Repeater will be listed
here. You can easily to select the computer name
without checking the IP address of the computer.
Type (4): Select the type of connection, TCP or UDP. If you’re not
sure, please select ‘Both’.
Port Range (5): Input the starting port number in the left field, and input
the ending port number in the right field. If you only
want to redirect a single port number, just fill the port
number in the left field.
Comment (6): Please input any text to describe this mapping, up to 16
alphanumerical characters.
1
3 4 5 6
7 8
9
11 12
13
2
10