System information
71
After you made the selection, please click ‘Apply’ button (2) and the following
message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Outdoor Wireless-N Smart Repeater so the settings will take effect after it
reboots.
3‐2‐2PortForwarding
This function allows you to redirect a single port or consecutive ports of
Internet IP address to the same port of the IP address on local network. The
port number(s) of Internet IP address and private IP address (the IP address
on local network) must be the same. If the port number of Internet IP address
and private IP address is different, please use ‘Virtual Server’ function,
described in next section.
Please click ‘Apps and Gaming’ tab at the top of web management interface,
then click ‘Port Forwarding’, and the following message will be displayed on
your web browser: