System information
42
2‐6‐1LANIPSection:
Here are descriptions of every setup item:
IP address (1): Please input the IP address of this Outdoor Wireless-N
Smart Repeater. This is the IP address used to
access your Outdoor Wireless-N Smart Repeater.
Make sure to make note of the new IP Address after
you change it since the old one will no longer work.
Subnet Mask (2): Please input subnet mask for this network.
802.1d If you wish to activate 802.1d spanning tree
Spanning Tree (3): function, select ‘Enabled’ for setup item ‘802.1d
Spanning Tree’, or set it to ‘Disabled’
DHCP Server (4): If you want to activate DHCP server function of this
Outdoor Wireless-N Smart Repeater, select ‘Enabled’,
or set it to ‘Disabled’. If you select Disable, the IP
settings from your source Internet network will be
passed through to clients connecting through the
Outdoor Wireless-N Smart Repeater. (For example, a
network with a DHCP server IP range of 10.1.1.1 –
10.1.1.100 will disperse IP addresses within that range
to computers connecting through your Outdoor
Wireless-N Smart Repeater while the Outdoor
Wireless-N Smart Repeater is connected to that
specific network)
1
3
2
4