System information

When you finish with all settings, click ‘Apply’, and you’ll see the following

message displayed on web browser:

Press ‘Go Back to save the settings made and go back to the web

management interface; press ‘Apply’ to save the settings made and restart the

Outdoor Wireless-N Smart Repeater so the settings will take effect after it

reboots.

NOTE: When you want to manage this Smart Repeater from another

computer over the internet, you have to input the IP address and port

number of this Smart Repeater. If your Internet service provider

assigns you with a static IP address, it will not be a problem; but if the

IP address your service provider assigns to you will vary every time

you establish an internet connection, this will be a problem.

Please either ask your service provider to give you a static IP

address, or use dynamic IP to host name mapping services like

DDNS. Please refer to chapter 2-5-8 ‘DDNS client’ for details.

NOTE: Default port number the web browser will use is ‘80’. If the

‘Port’ setting in this page is not ‘80’, you have to assign the port

number in the address bar of web browser manually. For example, if

the IP address of this Smart Repeater is 1.2.3.4, and the port number

you set is 8888, you have to input following address in the address

bar of web browser:

http://1.2.3.4:8888