System information

ChapterII:Sy stemandNetworkSetup

2‐1Buildyournetwork(Initialhardwaresetup)

Please follow the following instructions to build the network connection

between the Hi-Gain Outdoor Wireless-N Dual Radio Smart Repeater and

your computers and other network devices:

1. Connect the antennas to your Outdoor Wireless-N Smart Repeater.

2. Connect the power adapter to the Outdoor Wireless-N Smart Repeater

3. Connect all ‘wired’ users to the HOW2R1 via the Wired Local Area Network

(LAN) ports in grey. For wireless user’s scan for the SSID of the Outdoor

Wireless-N Smart Repeater (Outdoor_Repeater) and connect. You must

be within range of the Outdoor Wireless-N Smart Repeater before

connecting.

Wireless Connection:

4. Check to see the activity of the LEDs on the front panel. ‘PWR’ LED should

be on, LAN LEDs should be on if the computer / network device connected

to the respective port of the Outdoor Wireless-N Smart Repeater is

powered on and correctly connected. If PWR LED is not on, or any LED

you expected is not on, please recheck the power connection, or jump to

‘4-2 Troubleshooting’ for possible reasons and solutions.