Datasheet

ManualsBrandsHawking Technologies ManualsSecurity CamerasHNC230G

HNC230G

Step 1 - Connect the HNC230G to the Power Adapter

Plug in the adapter for power. Insert Ethernet LAN cable into the camera's Ethernet port (if

necessary) for wired LAN connectivity.

Step 2 - Setup and Configure the Network Camera

Insert the included Setup Wizard CD into your computer's CD-ROM drive. Then follow the

on-screen instructions to configure your Network Camera for network use.

Step 3 - Connect and Go!

HNC230G

Wireless-G Net-Vision

Network Camera

Network Specifications:

 IEEE 802.11b/g standards

Video Specifications:

 Max Resolution: 640 x 480 pixels

 Sensor: 300,000K pixels, 1/4" color CMOS sensor

 Gain control: Automatic

 Exposure: Automatic

 White Balance: Automatic

 Focal Length: 6.0 mm

 Aperture: F=1.8

Image (Video Settings):

 Image compression: Motion-JPEG Image Video

 Color: Digital 24-bit Color

 Frame rate: 30fps@CIF, 20fps@VGA

 Video resolution: 320x240, 640x480

System Hardware:

 LAN Connector: One RJ-45 port to connect to

10/100Mbps Ethernet

 Antenna Connector: One RP-SMA port to connect

to antenna

 LED Indicator: Monitoring LED (Green),

Ready LED (Orange), LAN LED (Green),

WLAN LED (Green)

 Power S upply: 12VDC, 0.5A

HTTP/Utility:

 Admin utility & Web browser Management

 View multiple cameras simultaneously

- Up to 4 cameras at a time

 Manual/Schedule Recording,

 Video Playback/Stop/Forward/Pause

 Supports four additional user accounts for

viewing camera

 DDNS and UPnP functions

 Windows 98SE/ME/NT/2000/XP/2003

 Firmware Upgradeable

Dimensions:

 43mm x 130mm x 105mm

Temperature:

 0-45

Humidity:

 10-90% (Non-condensing)

Certifications:

 FCC, CE

Wireless-G Network Camera