User`s manual

Chapter 7 Restore Factory Defaults

You may restore the HMPS2U default parameters by one of the following methods.

7.1 Using the Server’s Web Pages

1. Go to the Server’s web page and click CONFIG

2. Enter administrator (default: admin) and password (default: admin).

3. Click Maintenance.

4. Click Factory Default.

5. Click Yes to confirm

7.2 Using Init Button

Plug in the power adaptor while pressing the Init button until the USB indicators blink.

After that, plug off the power adaptor and then plug in the power adapter again to restart

the Server. Finally, the Server will operate using the Factory Default values.

7.3 Default Parameters List