User's Manual

21
Device Control: Any changes that have been made in the
configuration menu will need a system reboot first before they
become active. To manually reboot the device select the
“Reboot” button.
Resetting Configurations: To reset the settings to the factory
default settings select the “Reset Configurations” button. This
tool is used in case configurations have been manually made that
hinder the device from working properly.
Upgrading the Firmware: In the case that a new firmware is
available, you may upgrade the device’s firmware using this tool.
Simply download the “bin” file in a local directory, select browse
and find the firmware file you wish to upgrade the Broadband
Booster with.
Changing the User Name and Password: To change the default
login information you must enter in your desired user name and
password.
Note- Resetting the Password: If you forget your selected user
name or password you may manually reset the username and
password to factory settings by following the steps below:
1) Disconnect the power to the Broadband Booster
2) Wait 5 seconds and plug the power back in.