User`s manual

96
enable security function of the wireless router before WPS is
activated, the router will auto set the security to WPA (AES) and
generate a set passphrase key for WPS connection.
Passphrase Key: The wireless security key of the router will be
displayed here.
Config Mode (3) There are ‘Registrar’ and ‘Enrollee’ modes for the WPS
connection. When ‘Registrar’ is enabled, the wireless clients will
follow the router’s wireless settings for WPS connection. When
‘Enrolle’ mode is enabled, the router will follow the wireless
settings of wireless client for WPS connection.
Configure Click ‘Start PBC’ to start Push-Button style WPS
by Push Button (4) setup procedure. This wireless router will wait for WPS requests
from wireless clients for 2 minutes. The ‘WLAN’ LED light on
the wireless router will be steady for 2 minutes when this
wireless router is waiting for incoming WPS request.
Configure Please input the PIN code of the wireless client you
by client wish to connect, and click ‘Start PIN’ button.
PinCode (5) The ‘WLAN’ LED light on the wireless router will be steady
when this wireless router is waiting for incoming WPS request.