User`s manual

94
3-6-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build connection
between wireless network clients and this wireless router. You don’t have to
select an encryption mode and input a long encryption passphrase every time
when you need to set up a wireless client, you only have to press a button on
the wireless client and this wireless router, and the WPS will automatically
configure for you.
This wireless router supports two types of WPS: Push-Button Configuration
(PBC), and PIN code. If you want to use PBC, you have to push a specific
button on the wireless client to start WPS mode, and switch this wireless
router to WPS mode too. You can push Reset/WPS button of this wireless
router, or click ‘Start PBC’ button in the web configuration interface to do
this; if you want to use PIN code, you have to know the PIN code of wireless
client and switch it to WPS mode, then provide the PIN code of the wireless
client you wish to connect to this wireless router. The detailed instructions
are listed follow:
Please click ‘General Setup’ at the top of web management interface and
click ‘Wireless Configuration’ on the left hand column. Select ‘WPS’