User`s manual

3-4-4 Setup procedure for ‘PPTP’:

PPTP requires two kinds of setting: WAN interface setting (setup IP address)

and PPTP setting (PPTP user name and password). Here we start from WAN

interface setting:

Select the type of how you obtain IP address from your service provider here.

You can choose ‘Obtain an IP Address automatically’ (equal to DHCP,

please refer to ‘Cable Modem’ section above), or ‘Use the following IP

Address’ (i.e. static IP address)

WAN interface settings must be correctly set, or the Internet connection will

fail even if settings of PPTP settings are correct. Please contact your Internet

service provider if you don’t know what you should fill in these fields.

Now please go to PPTP settings section: