User`s manual

120
4-3 Firewall
Besides NAT, this router also provides firewall function to block malicious
intruders from accessing your computers on local network. These functions
include inbound attack prevention, and block outbound traffics, like block
URLs which have pre-defined keywords.
Please follow instructions to enable or disable firewall function:
Please click ‘General Setup’ at the top of web management interface and
click ‘Firewall’ on the left hand column.
Note: the other Firewall features will not be enabled until you choose
‘Enable’.
Please select ‘Enable’ or ‘Disable’ to enable or disable firewall function of
this router.
Note: the other Firewall features will not be enabled until you choose
‘Enable’.
Click ‘Apply’ button, and the following message will be displayed on your
web browser: