User`s manual

107
4-2-2 Port Forwarding
If you enable Network Address Translation (NAT), the Port Forwarding
section will be available for configuration.
This function allows you to redirect a single port or consecutive ports of
Internet IP address to the same port of the IP address on local network. The
port number(s) of Internet IP address and private IP address (the IP address
on local network) must be the same. If the port number of Internet IP address
and private IP address is different, please use ‘Virtual Server’ function,
described in next section.
Please click ‘General Setup’ at the top of web management interface and
click ‘NAT’ on the left hand column. Choose ‘Static Router’.
Enable Port Check this box to enable port mapping, and uncheck
Forwarding (1): this box to disable port mapping.
1
3 4 5 6
7 8
9
10
11
12
13
2
14
1
5