User's Manual

91
4-3-1 Access Control
This function allows or denies computers with specific MAC address from connecting to
the network; it can also allow or deny computers with specific IP address, protocol, or
port.
Click “Security” tab at the top of web management interface, then click “Access Control”,
and the following message will be displayed on your web browser:
Enable MAC Check this box to enable MAC address based
Filtering (1): filtering, and please select “Deny” or “Allow” to decide the
behavior of MAC filtering table. If you select deny, all MAC
addresses listed in filtering table will be denied from connecting
to the network; if you select allow, only MAC addresses listed in
filtering table will be able to connect to the network, and rejecting all
1
2
3
5
6
7
8
9
10
11
13 14 15
4
12