User's Manual

this particular application.

UDP Port to Open (5): This is the out going (Outbound) range of UDP port numbers

for this particular application.

Comment (6): The description of this setting.

Pop. Applications This section lists the more popular applications that (7):

require multiple connections. Select an application

from the Popular Applications selection and click ‘Add’ to save

the setting to “Current Trigger-Port Table”.

Add (8): Add the setting to the “Current Trigger-Port Table”.

Reset (9): Click “Reset” will clear all above setting and you can set up

again.

Current Trigger-Port All the settings for the special applications will be

(10): listed here. If you want to remove some Special Application

settings from the “Current Trigger-Port Table”, select the

Special Application settings you want to remove in the table and

then click "Delete Selected". If you want remove all Special

Appliacation settings from the table, just click "Delete All"

button. Click "Reset" will clear your current selections.

Delete Please select a special application by clicking

Selected (11): the ‘Select’ box of the mapping, then click ‘Delete Selected’

button to remove the setting. If there’s no setting here, this

button will be grayed out.

Delete All (12): Delete all settings existed in trigger port table.

Note: Only one LAN client can use a particular special application at a time.