User's Manual

81
Smart Dish Repeater will be listed here. You can easily to select
the computer name without checking the IP address of the
computer.
Private Port (4): Input the port number of the IP address
which provides Internet service.
Type (5): Select the type of connection, TCP or UDP. If you’re not sure,
please select ‘Both’.
Public Port (6): Please select the port number of Internet IP address which will
be redirected to the port number of local IP address defined
above.
Comment (7): Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add (8): Add the mapping to virtual server table.
Reset (9): Remove all inputted values.
Virtual Server All existing virtual server mappings will be
Table (10): displayed here.
Delete Please select a virtual server mapping by clicking
Selected (11): the “Select” box of the mapping, then click “Delete Selected”
button to remove the mapping. If there’s no existing mapping,
this button will be grayed out.
Delete All (12): Delete all mappings existed in virtual server table.
Reset (13): Unselect all mappings.
After you finish with all of your settings, click “Apply” and the following message will
be displayed on your web browser: