User's Manual

68
Authentication Mode: The wireless security authentication mode
of the Smart Repeater will be displayed here. If you do not
enable the security function of the Smart Dish Repeater before
WPS is activated, the Smart Dish Repeater will automatically
set the security to WPA (AES) and generate a set passphrase key
for a WPS connection.
Passphrase Key: The wireless security key of the Smart Dish
Repeater will be displayed here.
Config Mode (3) There are “Registrar” and “Enrollee” modes for the WPS
connection. When “Registrar” is enabled, the wireless clients
will follow the Smart Dish Repeater’s wireless settings for WPS
connection. When “Enrolle” mode is enabled, the Smart Dish
Repeater will follow the wireless settings of wireless client for
WPS connection.
Configure Click “Start PBC” to start Push-Button style WPS
via Push Button (4) setup procedure. The Smart Dish Repeater will wait for WPS
requests from wireless clients for 2 minutes. The “Wireless”
LED on the Smart Dish Repeater will be on steadily for 2
minutes while the Smart Dish Repeater waits for incoming WPS
requests.
Configure Please input the PIN code of the wireless client you
via client wish to connect, and click “Start PIN” button.
PinCode (5) The “WLAN” LED on the wireless Smart Dish Repeater will be
steady on when this wireless Smart Dish Repeater is waiting for
incoming WPS request.