User's Manual

Enable Wireless To enforce MAC address filtering,

Access Control (4): you have to check ‘Enable Wireless Access Control’. When this

item is unchecked, wireless Smart Dish Repeater will not

enforce MAC address filtering of wireless clients.

MAC Address (5): Input the MAC address of your wireless devices here, dash ( - )

or colon ( : ) are not required. (i.e. If the MAC address label of

your wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or

‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’.

Comment (6): You can input any text here as the comment of this

MAC address, like ‘ROOM 2A Computer’ or

anything. You can input up to 16 alphanumerical

characters here. This is optional and you can leave

it blank, however, it’s recommended to use this field

to write a comment for every MAC addresses as a

memory aid.

Add (7): Click ‘Add’ button to add the MAC address and associated

comment to the MAC address filtering table.

Clear (8): Click ‘Clear’ to remove the value you inputted in MAC address

and comment field.

After you finish with all of your settings, click “Apply” and the following message will

be displayed on your web browser: