User's Manual

47
If you want to delete a specific item, check the “Select” box of a MAC address and IP
address mapping (1), then click “Delete” button (2); if you want to delete all mappings,
click “Delete All” (3).
After you finish all LAN settings, click “Apply” on the middle of this page. After you
click “Apply”, the following message will be displayed on your web browser:
Press “Go Back” to save the settings and go back to the web management interface; press
“Apply” to save the settings made and restart the Smart Dish Repeater. The settings will
take effect after it reboots.
1
2 3