User's Manual

7
1-5 Product Overview
FrontPanelLEDs
LED Name
(Left to Right)
Light Status Description
WWAN LED
Stable ON This LED determines your Wireless Internet
connection strength.
Solid Light: >66%, Good Connection
Fast Blinking: 33%-66%, Moderate Connection
Slow Blinking: <33%, Poor Connection
Stable OFF Not Connected
WIRED Local
Network (1~2)
Fast Blinking Port is Connected with Traffic
Off Port has no Connection
Wireless (LAN)
Internet
Stable ON Wireless LAN is enabled
Stable OFF Wireless LAN is disabled
Blinking Wireless LAN data is transferring
WPS/Reset
Factory Reset: Press and hold for 30 seconds, power off/on to initiate a factory reset.
All settings will be wiped out.
WWAN WPS: Press WPS button and hold for 2 seconds for WWAN to initiate WPS.
Press the WPS button within 120s on the wireless router/access point to connect.
WLAN WPS: Press WPS and hold for 5 seconds for WLAN to initiate WPS. Press the
WPS button on your wireless client within 120s to connect to the HAW2DR.