User Manual
15 16
brightness setting is recommended. The lower settings may not be visible
during bright daylight. Reticles are black in the off position or if the
battery is defective.
All Hawke illuminated scope models use a CR2032 coin style lithium
battery. To insert a battery unscrew the battery compartment cap on the
top of the rheostat adjustment turret and insert a new battery “+” side
up.
Warning: Always hold onto the lower half of the rheostat when loosening or tightening the battery
compartment cap to ensure no damage is done.
MAINTAINING YOUR RIFLESCOPE
Each Hawke riescope is a precision instrument that deserves a high level of care. During
manufacture the scope is purged with dry nitrogen and sealed to give a lifetime of reliability. Do not
attempt to disassemble or clean the scope internally.
Keep the protective lens covers in place when the scope is not in use.
The external lens coatings should occasionally be wiped clean with the lens cloth provided or an
optical quality lens paper. Remove any external dirt with a soft brush to avoid scratching the lens.
Note: Unnecessary rubbing or use of a coarse cloth may cause permanent damage to lens coatings.
To clean the external surface of the scope it is recommended that a silicone impregnated cleaning