User Manual
13 14
ATTACHING THE SIDE WHEEL - ENDURANCE 30 SF & AIRMAX 30 SF
1. Remove the side focus nut using the key provided.
2. Locate the side wheel and place into the grooves on the side focus
shaft. The wheel is designed to t one way only into the grooves. This
ensures its position is correct in relation to the markings on the side
focus shaft.
3. When the side wheel is in place, replace the nut and tighten using the
key. Over tightening the nut may cause side wheel operation to seize.
ATTACHING THE SIDE WHEEL - SIDEWINDER 30 SF
1. Align the ‘teeth’ of the parallax control and the brightness control on
the riescope. Then slide the wheel completely past the brightness control and onto the parallax
control.
2. To read the scale on the side wheel we recommend using the ‘pointer’. To install, place the
‘pointer’ around the body tube, at your preferred position.
ILLUMINATION
The illumination rheostat is located on the side of the saddle or on the
eyebell.
High brightness settings are recommended for daytime use when
ambient light is bright, this will allow the reticle to be visible against
dark backgrounds. At times of low light such a dawn or dusk, a lower