Owner manual

80
Maintain:
Wrenches:
Grease wrench nut threads
Check dies for wear, replace if slipping
Spinner:
Check chain for wear
Hit OILER button for 3-5 seconds every third or fourth spin
Grease:
 Zerkttingsinandaround:
Spinner
Wrench head
Main rotation bearing assembly (PN 51220)
Check:
Hydraulic oil level in power unit (PN 51640)
 Airlterindicator,replacelterifindicatorisred
 Hydrualicoillterindicator,replacelterifindicatorisred
Routine Maintenance
Equipment must be maintained on a routine basis.
*Failure to conduct routine maintenance could result in equipment damage or injury to
personnel.
Proper Use of Equipment
Hawk equipment is designed for specic functions and applications, and should be used only for
its intended purpose.