Manual

33
Maintenance & Repair
Air Power Pack Maintenance
BODY ASSEMBLY
SEAL HOLDER
DEFLECTOR / SHROUD
GASKET (ELEMENT)
HOLDER (ELEMENT)
BOWL ASSEMBLY
AUTO DRAIN
( Looks different than shown)
BAFFLE
GASKET (ELEMENT)
SEAL (BODY TO BOWL)
ELEMENT (FILTER)
1. The air lter element should be
changed once every three (3)
months.
2. Unscrew theairlterbowl
(AFB) and replace the element.
3. Thelterisanauto-draintype.
Make sure the auto-drain
system is working correctly
by checking the uid level
sight gage (FSG) on the side
ofthebowl.Iftheuidlevel is
higher than the middle of the
sight gage, the auto-drain is
mal-functioning. Replace the
auto-drain asshowninthelter
diagram below.
Changing Air Filter Element
FSG
031-F17 Air Filter
Air Filter Maintenance
ELEMENT
002-F17-1
ITEM
P/N
DRAIN
002-F17-2
NOTE
Clean and dry air is essential for
maximum Spinmaster performance
and dependability.
AFB