Owner's manual

10. Disengage the Winch Clutch (C).
Spool out enough line to anchor
the Winch Cable Spring
Shackle (S) to a structural
point on the derrick.
11. Anchor the Winch Cable Spring
Shackle (S) to a structural point on
the derrick. Make sure there is
enough slack in the line to enable
the HawkJaw to move onto
the drill pipe connection.
12. Engage the Winch Clutch (C).
13. Use Winch O (WO) to pull the
HawkJaw 3’ to 5’ ft. away from the
wellbore. This allows the drill pipe
stands to swing straight from pick-
Winch Hook-Up
Winch Hook-Up
16 Installation