Instruction Manual

Specification Sheet
Specification
Sheet
PERFORMANCE
AND POWER REQUIREMENTS
DIMENSIONS
DEPTH: 34 in.
WIDTH: 40 in.
HEIGHT: 90 in.
TORQUE: 65,000 ft. lbs.
MAXIMUM PIPE ROTATION: 50 degrees
WRENCH SIZE RANGE: 3 1/2"
__
8" OD tool joints
SPINNER SIZE RANGE: 3"
__
5 1/2" OD tube
AIR POWER SOURCE: 100 psi @ 2-10 cfm
HYDRAULIC POWER SOURCE: 2,600 psi @ 20-35 gpm
HYDRAULIC POWER SOURCE TYPE: Closed Center System
WEIGHT: 2,200 lbs.
GRIP, SPIN, MAKE UP & RESET CYCLE TIME: 10 sec. or less
GRIP, BREAK OUT, SPIN & RESET CYCLE TIME: 12 sec. or less
7Specification Sheet
NOTE
If the only available hydraulic power unit is open center, then a Hawk supplied hydraulic
converter (Part # J-80) is required. Running the HawkJaw with a constant volume hydraulic
power unit may result in bodily injury and will cause damage to the HawkJaw and to the
hydraulic power unit.