User guide

Removing Linkage Bolts
1. Locate the 30004A-TOOL (T)
in the storage box on the
Hawkjaw transportation pallet.
2. Remove the to gain access to the
linkage bolt jam nut (JN) by
removing the adjust nut, nut
retainer, and nut lock assembly.
Then slide the hook clear of the
jam nut.
3. Place the tool on the jam nut. The
jam nut can be loosened using any
1 7/8" wrench.
63
Maintenance & Repair
Special Tool 3004A-TOOL
WARNING
When reinstalling linkage and
linkage bolts, be sure to reinstall
the linkage bolt jam nuts. Failure
to reinstall the jams nuts may cause
poor unit performance due to
sagging of middle wrench.
T
JN