Home shaved ice machines, flavors and accessories.
SAVE THIS MANUAL FOR FUTURE USE Registration You may register this ice shaver through our website at www.HawaiianShavedIce.com/register.
General Warnings and Safeguards CAUTION To prevent property damage and personal injury, it is important that you read and follow all general warnings, safeguards and instructions. Read the instructions provided in this booklet carefully, as they give important information with regards to the assembly, use and maintenance. Preserve this manual carefully for future reference. This ice shaver is intended for household use only. This ice shaver has a blade that is extremely sharp.
To prevent electrical shock to yourself or others, do not immerse the cord, plugs, motor unit or any other electrical parts in water or other liquids. Use extreme caution to make sure that you never place your fingers or other items into the machine or the machine’s moving parts. Do not operate the machine without ice. Use this appliance for no more than 2 continuous minutes. Failure to obey this may cause the ice shaver to overheat. Allow the appliance motor to cool down before repeat usage.
However, if necessary, only use single or multiple adapters and extension cables which comply with the existing safety standards, making sure that the current carrying capacity limits, marked on the single adapter and on the extension cables, as well as the maximum power limit marked on the multiple adapter, are not exceeded. Do not use the machine around a hot surface or hot appliances. Keep the appliance away from stovetops, broilers, ovens or any other potentially hot appliance.
Never pull the electrical cable or the appliance itself to remove the plug from the electrical socket. Avoid all contact with any moving parts of the appliance. Never leave the appliance exposed to the elements (rain, sunshine, etc.). Never let children or those unable to operate the appliance use it unattended. Do not leave the unit unattended while plugged into a power source.
In order to avoid dangerous overheating, it is advisable to unwind the electrical cable completely and use the appliance as recommended in the “Usage Precautions” paragraph. Never leave the appliance plugged in when not needed. Unplug from the power supply plug whenever the appliance is not used. Never obstruct the openings or slits for ventilation and heat dissipation.
from the socket and take the appliance to the manufacturer for the necessary checks. Before plugging in the appliance, check that the button is in not pressed “on”. Ensure that the ice shaver and the cable are not too close to the edge of the table or work surface, and that it is not touching heat sources; ensure also that it is not near a sink. Never immerse the motor unit in water or other liquids.
Ice Shaver Specifications Model S900A, Electric Ice Shaver Power: 120v, 60 Hz, 55W max ETL approval Made in China Product Warranty Ice Shaver 1 Year Limited Warranty Mary Mack’s, Inc.
Inc, claims no responsibility for consequential, foreseeable, incidental, or commercial losses caused by the use of this product. If a problem with this ice shaver develops during the warranty period, please contact, Mary Mack’s, Inc for service. Send a brief letter explaining the problem along with a purchase receipt or other proof of date of original purchase will be required before warranty service is rendered. Be sure to include your name, address and phone number.
Assembly and use: 1. Always ensure that the appliance is switched off, and that it is not plugged into an electrical outlet before you assemble and dismantle the ice shaver. 2. Fill the ice molds (Figure A. 5) with water. Place the ice molds on a level surface in the freezer until the water is completely frozen. Once frozen you will have a small round block of ice. If needed, additional ice molds may be purchased. 3.
9. For the fluffiest ice, allow the ice blocks or ice cubes to thaw for about 5 -7 minutes before shaving. This will produce a fluffier snow. 10. Place the ice block or ice cubes into the ice crusher cup (Figure A. 2). Make sure that the ice block is removed from the plastic ice mold before placing into the ice crusher cup (Figure A. 2). 11. During the freezing stage, the block of ice may become domeshaped. If this should happen, place the dome-shaped side of the ice block down into the machine.
Cleaning: Dismantle the appliance in the reverse order to the procedure described for assembling it. During cleaning, use caution and pay special attention to the ice shaver blade and avoid all contact with the blade to prevent injury to yourself or others. Avoid using abrasive detergents or cloths. The motor unit may be cleaned with a slightly damp cloth but do not soak or immerse the motor unit in water or other liquid. All the machine parts other than the motor unit (Figure A.
Have fun with Shaved Ice There is so much more that you can do with shaved ice than just simply shaving ice in a bowl and adding flavor. Try these great recipes below for fun and easy treats. The Classic Shaved Ice – Shave a mountain of fluffy snow into a small bowl or ice cup. Add premium shaved ice flavor from HawaiianShavedIce.com and enjoy. The flavor will be absorbed into the ice. Remember that a little flavor goes a long way.
Fruit Ice – Instead of shaved ice syrup or soda, try natural fruit juices, lemonade or even tea over shaved ice. Serve these treats at your next party and it will be a hit! Mixed Drinks – Instead of having your alcoholic drink on the rocks, try serving it over shaved ice. This also works well with margaritas, smoothies and other frozen drinks! Shaved Ice Toppings Sweetened Condensed Milk/Sweet Cream – This is the most popular topping used at shaved ice stands.
Mary Mack’s, Inc.
