Technical Specifications

Havoline
®
Motor Oil — Continued
Always confirm that the product selected is consistent with the original equipment manufacturer's recommendation for the
equipment operating conditions and customer's maintenance practices.
1 October 2018
PCMO-70
2-8
SAE 20W-50 is suitable primarily for older engines
for use in high temperature and heavy duty operations
such as towing heavy trailers at highway speeds or up
inclines for long periods of time. It is also
recommended for some high performance engines
used in racing and rallying.
SAE 30 can be used in engine applications where an
SAE 30 passenger car motor oil of API SN Plus or any
previous "S" category is recommended. It performs
exceptionally well in small four-stroke engines found in
lawn mowers, garden tractors, and snow blowers, and
in refrigeration or air-conditioning engines on trucks
and buses.
Note: Always consult your owner's manual regarding
viscosity grade.
Havoline
®
Motor Oils meet:
•
API Service Categories
— SN PLUS
— SM, SL, SJ and all previous API “S” categories
— Resource Conserving for API SN PLUS
(SAE 5W-20, 5W-30, 10W-30)
— ILSAC GF-5 (SAE 5W-20, 5W-30, 10W-30)
•
manufacturers' performance requirements
—
FCA US LLC (formerly known as Chrysler Group
LLC)
MS-6395 (SAE 5W-20, 5W-30, 10W-30)
—
FIAT
9.55535-CR-1 (SAE 5W-30)
—
Ford
WSS-M2C945-A (SAE 5W-20)
WSS-M2C946-A (SAE 5W-30)
—
General Motors
GM 6094M (SAE 5W-20, 5W-30, 10W-30)
TYPICAL TEST DATA
Minor variations in product typical test data are to be expected in normal manufacturing.
SAE Grade 5W-20 5W-30 10W-30
Product Number 224101 224102 224103
SDS/MSDS Number
USA
Colombia
El Salvador
17808
—
—
17808
—
—
17808
31063
31407
Density at 15°C, kg/L 0.8612 0.8604 0.8728
API Gravity 32.81 32.96 30.62
Viscosity, Kinematic
mm
2
/s at 40°C
mm
2
/s at 100°C
51.35
8.5
64.3
10.4
71.0
10.3
Viscosity, Cold Crank, °C/Poise -30/59 -30/61 -25/64
Viscosity Index 142 151 131
Flash Point, °C(°F) 226(439) 230(446) 224(435)
Pour Point, °C(°F) -41(-44) -37(-35) -34(-33)
Sulfated Ash, mass % 0.8 0.8 0.8
Base Number, ASTM D2896, mg KOH/g 7.8 7.8 7.5
Phosphorus, mass % 0.068 0.068 0.068
Zinc, mass % 0.080 0.080 0.080
Magnesium, mass % 0.004 0.004 0.004