manual

C-VS-1600-EXPL-1_INST_7-12.docx
Remove one (1) screw holding
top / forward trim bezel.
(7mm socket)
Carefully remove / unsnap trim
bezel and remove terrain
management switch or accessory
pocket. It helps to turn ignition on
and move shift lever knob rearward.
Carefully unsnap shifter boot from
underside of trim bezel.
Unplug Aux input jack and 12 volt
socket. O.E.M. plugs and wiring
will be reused later.
O.E.M. console prior to removal
Lift arm rest and remove (unsnap)
trim piece with 12 volt socket.
Unplug socket.
Carefully unsnap and remove
console side panels
Remove Aux input jack from trim
bezel assembly.
To be reused later.
Remove two (2) screws for rear
storage pocket latch bracket.
(7mm socket)
Remove storage pocket.
Note: There is a sensor attached
to the bottom of pocket that must
be unplugged.