manual

C-TTB-CV-F_INST_6-096-09
Center and lower tray to maximize
height for equipment
Tighten all hardware.
Loosely attach Driver/Pass side
mounting brackets to vehicle as shown
in photo above using ¼” x ¾” Hex
bolts, washers and serrated nuts.
Loosely attach Driver/Pass side
mounting brackets to trunk tray
using ¼” x ¾” Hex bolts, washers
and serrated nuts.
Center and lower tray to maximize
height for equipment
Tighten all hardware
Loosely attach front mounting
brackets to vehicle using ¼” x ¾”
Hex bolts, washer and serrated nut.
Loosely attach front mounting
bracket to trunk tray assembly using
¼” x ¾” Hex bolt and serrated nut.
Ford Crown Victoria Police
Interceptor trunk
Remove spare tire and tire jack
from trunk
Position trunk tray on top of
trunk deck