Datasheet

C-TCB-5_INST_6-096-09

INSTALLATION INSTRUCTIONS

C-TCB-5 MEDIUM DUTY PASSENGER-SIDE MOUNT

1997-2013 FORD EXPEDITION

TOOLS REQUIRED:

3/16” Allen wrench

Standard socket set

Torx bit set

Power drill w/ 3/8” drill bit

Ratcheting wrench

Open-end wrench set

MATERIAL LIST

KEY# QTY DESCRIPTION PART #

1 1 Pole support assembly CM93071-5W

2 1 Passenger-side mount assembly CM93072-3

3 1 Under floor plate with threaded hole CM93132

HARDWARE LIST

KEY# QTY DESCRIPTION PART #

4 1 3/8” x 1” Hex head bolt GSM33028

5 1 3/8”Flat washer GSM31007

Under floor

plate

Pole support

assembly

Passenger-side

mount assembly

PAGE 1
INSTALLATION INSTRUCTIONS C-TCB-5 MEDIUM DUTY PASSENGER-SIDE MOUNT 1997-2013 FORD EXPEDITION TOOLS REQUIRED: 3/16” Allen wrench Standard socket set Torx bit set Power drill w/ 3/8” drill bit Ratcheting wrench Open-end wrench set MATERIAL LIST KEY# QTY 1 1 2 1 3 1 DESCRIPTION Pole support assembly Passenger-side mount assembly Under floor plate with threaded hole PART # CM93071-5W CM93072-3 CM93132 HARDWARE LIST KEY# QTY 4 1 5 1 DESCRIPTION 3/8” x 1” Hex head bolt 3/8”Flat washer PART # GSM33028 GSM31
PAGE 2
Always! Read all instructions before installing any Havis, Inc. products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit INSTALLATION: 1. Remove front passenger seat bolts. Loosen, but do not remove, the two rear passenger seat bolts. 2. Place base of the pole support assembly underneath of the seat base brackets. 3. Align the holes of the seat base, the pole support assembly, and the floor holes. Replace the front seat bolts.