User Manual

www.havis.com 1-800-524-9900
• Low prole, safe and strong.
• Specically designed for sturdy, compact computer mounting.
• 2 piece housing allows for adjustable height (Expands 1” or 2” to provide additional internal mounting depth)
• Independent keyboard and monitor brackets allow installer to customize height positioning.
• Swing arm feature provides easy and comfortable positioning of keyboard or laptop.
• Mounts to vehicle hump bracket or trak mount base, ordered separately (with trak mount recommended)
• Accepts all Heavy Duty Console equipment brackets & ller plates (Up to 8”).
• Modular design allows for add-on options such as:
• Slide out printer mount (C-PMS)
• Low prole console extension (keeps control heads below seats) (C-SM-800)
• Cup holder, lighter outlets, & most Havis Console accessories.
The heavy duty swing arm is a perfect mount for laptop computers or keyboards.
The height is set at installation so there is no need for up/down mechanisms
that are rarely used. The swing-arm is safely locked into stored position or
released for use by a spring lock.
C-SM-830 shown with
Motorola MW800 monitor
& keyboard, and Pentax
PocketJet printer
C-SM-830 shown with
Dell Latitude Laptop, and
Pentax PocketJet printer
Ideal Mounting Systems
Heavy Duty Swing Arm
C-SM-830
8” Enclosed 30° Angle Heavy Duty Series Console Housing
• 7.25” high, 9” wide, 13” length, 7.75” max. depth, min. depth 3.5”
C-SM-SA-1
Mounting Bracket Complete with Swing Arm Adapter for
Heavy Duty Series & Standard 9” wide Consoles
• 9” wide; 12 gauge steel with welded corners
• Solid ½” machined aluminum swing arm
• Spring pin locks arm in stored position
• Mounts to C-SM Series Console Platform
• Accepts all tilt/swivel or hat brackets
C-SM-MMP
Monitor Mounting Bracket for
Heavy Duty Series & Standard 9” wide Consoles
• 9” wide; 12 gauge steel with welded corners
• Mounts to C-SM Series Console Platform
• Accepts all tilt/swivel or hat brackets (ordered separately)
• Specically designed for monitor mount brackets (C-UMM Series)
Assembled Part Breakdown:
1 C-3082-1
2 C-SM-830 (Housing only)
3 C-SM-SA-1
4 C-SM-MMP
5 C-PMS
Shown with optional C-3065-3
C-PMS
Printer Mount Slide Tray
• Bolts to Console housing or any at surface
• Slides out towards passenger side
• Designed for Pentax Pocketjet Printer only
• Order Printer Mount housing separately (Part # C-PM-101)
Heavy Duty Console Equipment Related Equipment