User Manual

Bradley Stand-On Hydro Drive Mower Owner’s Manual
13
G
ENERAL
M
AINTENANCE
Proper maintenance and adjustment of your Bradley hydro mower is necessary to keep the mower in
good, working and safe condition. The maintenance of the mower is the responsibility of the
owner/operator and must be performed at regular intervals. When replacing any parts or servicing your
mower, be sure to use only genuine Bradley mower replacement parts to ensure quality performance of
your mower.
DANGER: BEFORE MAKING ANY ADJUSTMENTS AND/OR SERVICING YOUR MOWER,
MAKE SURE THE MOWER IS ON LEVEL GROUND, THE BLADES DISENGAGED, THE KEY
REMOVED, AND THE ENGINE OFF WITH THE SPARK PLUG WIRE(S) REMOVED FROM THE
SPARK PLUG(S) TO PREVENT ACCIDENTAL CONTACT. IF ADJUSTMENT OR MAINTENACE IS
BEING PERFORMED AFTER OPERATION OF THE MOWER, ALLOW THE UNIT TO COOL AS
HEAT BUILDUP COULD CAUSE SEVERE BURNS.
M
AINTENANCE SCHEDULE
I
TEM PROCEDURE TIME INTERVAL
Break-In
(first 5
hours)
Every 8
hours
(Daily)
Every 40
hours
(Weekly
Every 100
hours
(Bi-weekly)
Every
200 hours
(Monthly)
Belts Inspect (adjust as needed)
Blades Inspect and Sharpen
Engine Air Filter Inspect
(see engine owner’s manual)
Engine Cooling Areas Clean
(see engine owner’s manual)
Engine Oil Check
(see engine owner’s manual)
Change
(see engine owner’s manual)
Engine Oil Filter Change
(see engine owner’s manual)
Engine Spark Plug(s) Inspect
(see engine owner’s manual)
Fuel Filter Replace
Fuel Line Check
Replace
every 2 years
Grease Fittings Refer to page 15
Hardware Check for proper tightness
Mower Main Frame Remove debris from under
belt cover
Power wash engine mower
Safety Interlock
System
Check operation and
switches
Tires Check air pressure